Halloween is coming up so this month I’ll be showing you how to sew your own mini drawstring treat bag. As my blog followers will know I’m a huge fan of recycling/upcycling material (take a look at my eco wear: link) so when I was given a stash of random bits of material I was keen to get stuck in and get sewing again. I hand-sew all my items as I like the control and the feeling that i’m really engaging with what I’m doing. I also feel that hand sewing can be therapeutic due to the repetitive motion and concentration it requires but this bag can be done using a sewing machine if you don’t have much time. Some materials are easier to work with than others. Generally speaking thinner cotton fabric is quite easy to work with. The spiderweb material I used had a lycra-esque quality to it which made it difficult to work with, for this tutorial I recommend sticking to non stretchy fabrics.

You will need:

halloweenbag12.jpg

 

♦ A cutting mat (optional but useful!)

♦ Fabric scissors

♦ Fabric marker/pencil

♦ Pins

♦ Sewing needle

♦ Cotton thread (in colours matching your material)

♦ A piece of material measuring at least 32 x 18 cm

♦ A piece of contrasting material measuring at least 32 x 8cm

♦ 2 pieces of ribbon approx. 32cm

Step 1

You’re going to need to cut out two pieces of material for the main part of your treat bag. Using a fabric marker/pencil, mark out two rectangles measuring 16 x 18 cm and cut out.

halloweenbag11

Step 2

For your casing you’ll need to cut out two rectangles measuring 16 x 8cm.

halloweenbag8

 

Step 3

To give a neat edge, fold shorter ends of your casing over 1cm and pin in place before sewing. I used basic backstitch.

halloweenbag7

 

halloweenbag5

 

Step 4

Pin your larger pieces of fabric together around three edges (2 long edges,1 short) with the wrong sides facing. Sew with 1cm seam allowance and turn the right way.

halloweenbag10

 

halloweenbag4

 

Step 5

Take your casing pieces and fold in half so you can see the neat side of your stitching. At this point if you have time it’s good to press your pieces with an iron but as I had limited time I skipped this step. It just makes your material more well behaved and neat. Pin your folded pieces to the top of your bag (raw edges at the top)

halloweenbag3

 

Step 6

It’s up to you how far down you wanht to sew, the further down you sew the less of the contrasting material you’ll be able to see and bear in mind you’ll need to be able to get your ribbon through. As I had a gap at the top of my material where the spiderweb pattern stopped I chose to sew quite low down, just above half way but anything 1cm or over is fine (providing you can fit your ribbon through).

halloweenbag2

 

Step 7

Turn your casing in. This is also a good time to press your material to keep your joins/edges crisp. Please remember that some fabrics can only be pressed at a very low heat though! Stretchy fabrics can actually melt. If you’re using cotton as recommended this isn’t a problem.

Step 8

Attach a safety pin to the end of your ribbon and feed it through the gap you’ve made with the casing.

halloweenbag1

And there you have it, your own unique Halloween treat bag! This pattern is so versatile, it can be used for any occasion, including Christmas and birthdays. You can alter the sizes to make a smaller or larger bag and is a great way to use up scraps of fabric.

Happy Halloween everyone!

Advertisements